Are all SLV Track Lighting products covered by the 5-year SLV warranty?

Yes — as an Official UK SLV Specification Partner, all genuine SLV Track Lighting luminaires, LED modules, and control gear supplied by SLV Lighting Direct carry the full 5-year SLV manufacturer warranty and UKCA/CE certification.

How do I select compatible LED drivers, track adapters, or accessories for SLV Track Lighting?

Each product page displays the official 6-digit SLV article SKU, required constant-current (mA) or constant-voltage (24V/48V) driver rating, and cut-out or mounting dimensions. You can also use our interactive SLV System Configurators to automatically match compatible housings, LED modules, rails, and drivers.

Can UK electrical contractors and lighting designers open a 30 EOM credit account?

Yes — UK electrical contractors, interior designers, architects, and M&E specifiers can apply online in under 2 minutes for a 30 EOM B2B trade credit line and volume project pricing, or call our technical desk on 01628 436099.

SLV Architectural Lighting 1792 Products

Track Lighting

Our popular range of track lighting allows for the installation of a lighting circuit in both surface and recessed mounting configurations. An incredibly versatile product type that is used in both residential and commercial installations affording customers the reconfiguration of luminaires at any time. With the transition to LED from other higher wattage lamp sources customers have virtually endless options without needing to worry about reaching the wattage capacity of the circuit. We stock a variety of different manufacturers from SLV’s low voltage wire system to powergear 3 Dali options. Track Lighting Circuits can be customised by simply cutting down to the desired length and joining using our wide variety of electrical and mechanical accessories. Track lighting can sometimes be daunting to some who are unfamiliar with the components required however we have many years of experience and are willing to advise those requiring a helping hand.

SLV® Visual Track & Wire System Selector

Compare All 5 SLV® Track Systems & Launch Your Interactive Builder

Scan the visual cards below to compare profile depth, switching zones, and multi-brand compatibility—then launch the matching interactive configurator.

Side-by-Side Spec Table Individual Parts (1792) ↓

Profile Depth 18 mm Slim 35mm W (Surf) / 57mm (Rec)

Control Zones 1 Switched Zone All lights switch/dim together

Brand Ecosystem SLV® Exclusive Proprietary adapter footprint

Advantages

Ultra-Slim 18 mm Depth: Discreet on standard 2.4 m home ceilings.
Lowest Cost per Metre: Most economical rail, connectors & spots.
Simple 240V 3-Core Wiring: Connects straight to L, N, Earth cable.
Wide SLV Spot Choice: Fits PURI 2.0, ENOLA 2.0, GRIP! & pendants.

Disadvantages

Proprietary SLV® System: Only fittings manufactured by SLV work in SLV’s 1-Circuit track (no third-party compatibility).
1 Switched Group Only: Every light turns on/off & dims together.
No Native DALI Bus: No internal data wires for digital scenes.

Control Zones 3 Switched Circuits Dial each spot to L1, L2 or L3

Brand Compatibility Powergear + 7 Brands EUTRAC, Global, ERCO, Zumtobel

Profile & Load 36 × 32 mm (11 kW) 1m, 2m, 3m & 4m rails

Advantages

Multi-Brand Compatibility (Powergear Rebrand): SLV S-TRACK® is a rebrand of Powergear and is compatible with fittings & rails from EUTRAC®, Global/Nordic, Zumtobel, ERCO, LTS ONETrack & unipro®—giving huge fitting choice & supply redundancy.
3 Independent Zones in 1 Rail: Switch or dim 3 groups separately via the adapter dial.
Heavy-Duty Commercial Rigidity: Supports high-lumen NUMINOS® L/XL & linear battens.

Disadvantages

Deeper 32 mm Profile: Almost twice the depth of 1-Circuit track (32 mm vs 18 mm).
Max 3 Hard-Wired Groups: For individual per-spotlight digital addressing, choose S-TRACK® DALI.
Earth (PE) Keyway Orientation: Left/Right Earth corners required (auto-selected in our Builder).

Digital Control 64 DALI-2 Addresses Dim & scene-group every spot

DALI & 3P Ecosystem Powergear DALI + 3P Global/Nordic, LTS, unipro + 3P

Conductors 7-Wire Spine L1/L2/L3/N/PE + DA+/DA-

Advantages

Multi-Brand DALI & Non-DALI Compatibility: Built on Powergear DALI—compatible with DALI fittings from Powergear, Global/Nordic, LTS ONETrack & unipro®, AND accepts standard non-DALI 3-circuit fittings from all major manufacturers!
64 Individual DALI-2 Addresses: Re-group & dim (1%–100%) any spotlight via software without rewiring.
7-Conductor Power + Data Bus: Combines 3 mains circuits + 2-wire DALI inside 36 × 32 mm rail.

Disadvantages

Requires DALI Controller: Needs a DALI-2 bus power supply/gateway & 5-core feed wiring.
Higher Rail & Corner Cost: 7-wire DALI rails and twistable corners cost more than non-DALI.
Black & White Finishes Only: Stocked in Matt Black & Matt White (no Silver-Grey).

Slot Width 26 mm Ultra-Slim 23mm Std / 47mm Deep & Rec

Adapter Look Flush Concealed Hides inside 47mm Deep rail

3D Routing Wall-to-Ceiling 90° Inside/Outside Stereo corners

Advantages

Concealed Adapter Aesthetic: Adapter box hides completely flush inside Deep (47mm) & Recessed rails.
3D Wall-to-Ceiling Runs: Touch-safe 48V SELV turns 90° from vertical walls onto ceilings.
Built-In DALI-2 & Wireless: Every rail includes DALI-2 wires; pair with In-Track Drivers or remote PSUs.
Micro-Scale Luminaires: Fits Ø 30 mm GRIP! S, NUMINOS XS & flush linear floodbars.

Disadvantages

Requires 48V DC Power Supply: Needs a click-in 48V Track Driver (100W/150W) or remote PSU (up to 400W).
Shallow (23mm) vs Deep (47mm) Split: Spots & corners must match rail depth (auto-filtered in Builder).
Dedicated 48V Ecosystem: Higher architectural cost per metre than 240V mains track.

Mounting Method Wall-to-Wall Tension Bridges open air up to 10m

Cable Spacing & Gauge 155 mm (4 / 6 mm²) Touch-safe 12V SELV cables

Power Supply 50VA–300VA 12V Surface or remote transformer

Advantages

No Ceiling Fixings Needed: Spans straight across skylights, rafters & double-height voids up to 10m.
Visually Weightless Cables: Preserves open sightlines in glazed extensions and timber-frame rooms.
Touch-Safe 12V SELV Power: Safe uninsulated cables powered by a 12V toroidal or electronic transformer.

Disadvantages

12V Voltage-Drop Physics: Spans >6m or loads >150W require 6 mm² cable (auto-calculated in our Builder).
Dedicated 12V Wire Fittings Only: Only accepts TENSEO® 155 mm wire-clamping spots & pendants.
Needs Solid Anchor Points: Turnbuckles apply tension—fix into masonry, joists, or reinforced pattresses.

Big White® 2027 Pages 5–6 • Multi-Brand Interoperability

3-Phase & DALI Cross-Manufacturer Compatibility Chart (SLV S-TRACK® / Powergear & EUTRAC®)

Unlike 1-Circuit track (which is proprietary to SLV), SLV S-TRACK® is a rebrand of popular track manufacturer Powergear and follows the European 3-phase standard—giving you cross-compatibility and supply redundancy with EUTRAC®, Global/Nordic, Zumtobel, ERCO, LTS ONETrack, and unipro®.

Cross-manufacturer compatibility between SLV S-TRACK (Powergear) and EUTRAC, Global/Nordic, Zumtobel, ERCO, LTS ONETrack, and unipro
Compatibility Scenario	SLV S-TRACK®	Powergear® (OEM)	EUTRAC®	Global / Nordic	Zumtobel	ERCO	LTS ONETrack	unipro®
3-Phase Standard (On/Off & Phase) Brand's 3P adapters in SLV Track & SLV 3P spots in Brand's rail	✓ Compatible	✓ Compatible	✓ Compatible	✓ Compatible	✓ Compatible	✓ Compatible	✓ Compatible	✓ Compatible
3-Phase DALI Digital (3P + DALI Bus) Brand's DALI adapters in SLV DALI Track & SLV DALI spots in Brand's rail	✓ Compatible	✓ Compatible	✕ Not DALI	✓ Compatible	✕ Not DALI	✕ Not DALI	✓ Compatible	✓ Compatible
Non-DALI 3-Phase Spots in S-TRACK® DALI Rail Standard non-DALI 3-circuit fittings clipped into S-TRACK® DALI track	✓ Compatible	✓ Compatible	✓ Compatible	✓ Compatible	✓ Compatible	✓ Compatible	✓ Compatible	✓ Compatible

*Note (Big White® 2027 p. 6): Compatibility applies to track luminaires/adapters and track rails. Mechanical rail joiners, corner connectors, and end feeds from different manufacturers should not be mixed.

At-a-Glance Engineering Matrix

Side-by-Side SLV® Track & Wire System Comparison

Comparison of SLV 1-Circuit, 3-Circuit, S-TRACK DALI, 48V Low-Voltage, and TENSEO 12V Wire Systems
Specification	01. 1-Circuit (240V)	02. 3-Circuit (S-TRACK / EUTRAC)	03. S-TRACK® DALI (3P + DALI)	04. 48V Low-Voltage DC	05. TENSEO® 12V Wire
Brand Compatibility	🔒 Proprietary (SLV Only)	✓ Powergear + 7 Brands	✓ Powergear DALI + All 3P	Dedicated SLV 48V System	Dedicated 155mm 12V Wire
Primary Use Case	Domestic rooms & single-switch zones	Retail, commercial & 3-group switching	Galleries, museums & digital scene control	Minimalist slots & 3D wall-to-ceiling runs	Vaulted ceilings, beams & open voids
Voltage & Max Load	240V AC • Max 16A (3.68 kW)	240V/400V AC • 3 × 16A (11 kW)	240V/400V AC • 3 × 16A + DALI Bus	48V DC SELV • 100W–400W per PSU	12V AC SELV • 50VA–300VA per Transformer
Circuit / Scene Control	1 Group (All together via Mains/Triac)	3 Independent Hard-Wired Circuits (L1/L2/L3)	Up to 64 Individual DALI-2 Luminaires + 3 Circuits	DALI-2, Casambi Bluetooth, or On/Off	1 Group per 12V Transformer
Rail Dimensions (W × H)	35 × 18 mm (Surf) / 57 × 18 mm (Rec)	36 × 32 mm (Surf) / 56 × 32 mm (Rec)	36 × 32 mm (Surf) / 56 × 36 mm (Rec)	26 × 23 mm (Std) / 26 × 47 mm (Deep)	155 mm Cable Spacing (4 mm² / 6 mm²)
Interactive Builder	1-Circuit Builder →	3-Circuit Builder →	S-TRACK DALI Builder →	48V Track Builder →	TENSEO® Builder →

Individual Component Catalogue

Browse & Filter All 1792 Individual Track & Wire Components Below

Already know the exact part numbers you need? Use the Track & Wire System Specifier sidebar on the left to filter by Component Type, System Voltage (12V / 48V / 230V), Finish, or Length.