Credit line
credit application
application
SLV EASYLIGHT® Commercial & Industrial Modular Linear Trunking Configurator (123 Active SKUs)
Build Your SLV EASYLIGHT® Modular Linear Trunking System
Configure a complete, toolless plug-and-play SLV EASYLIGHT® Continuous Linear Trunking System for commercial, retail, warehouse, and industrial spaces. Unlike traditional two-piece rail-and-insert trunking, every EASYLIGHT® module is a self-contained, through-wired 65×68mm aluminium trunking section with an integrated 136mm electromechanical male plug on one end and an internal female socket on the other—sliding and clicking directly together end-to-end with a ≤1mm seam. Mix 1.5m & 2.5m Multi-Lumen/Multi-CCT Battens (up to 201 lm/W, 5 optical distributions, optional 3-Hour Emergency battery packs), 0.5m Gimbal Spotlights, 1.0m Dedicated Emergency Downlights, 1.5m/2.5m 3-Phase Track inserts, and 1.5m/2.5m/4.5m Blind Covers.
1. Self-Contained Click-Fit: Integrated 136mm Plug Tongue (No Separate Rail Needed)
2. On-Unit Switches: 3× CCT (3500K/4000K/5000K) + 8-Step DIP Wattage + L1/L2/L3 Phase
3. Smart Wiring: Auto 5-Pole (ON/OFF) or 7-Pole (DALI2 / DALI2+EM)
4. Dual Builder: Auto Run-Length Calculator + Visual Slot-by-Slot Line Editor
Interactive System Guide
How the SLV EASYLIGHT® System Works & Clicks Together
START OF RUN (+300mm)
Feed-In Box (FIB 300)
Brings 230V mains (L1/L2/L3/N/PE) + optional DALI/EM cables into the start of the line from top or end.
136mm Plug Tongue →
"CLICK"
PRIMARY LUMINAIRES (+1500 / +2500mm)
Linear LED Battens (Standard or EM 3H)
Self-contained through-wired trunking batten. Available in Standard or with integrated 3-Hour Emergency battery pack.
136mm Plug Tongue →
"CLICK"
INTERMEDIATE MODULES (MIX & MATCH)
Spot 500 · EM 1000 · 3PH Track · Blind Cover
Click in accent gimbal spotlights, dedicated 3H emergency downlights, 3-phase track bays, or dark through-wired blind covers.
Closes Female Socket →
SEAL
END OF RUN (+0mm or +300mm)
End Cap (EC) or Feed-Out Box (FOB 300)
Snap on the flush End Cap (`EC`) to finish the run, or fit a `300mm` Feed-Out Box (`FOB 300`) to jump cable to a parallel line.
Why Physical Length is +136mm (`1636mm` / `2636mm`): Every module has a `136mm` electromechanical plug tongue on the left that slides completely inside the previous module. A `1500mm` batten (`1636mm` in the box) adds exactly 1500mm (1.5m) to your visible ceiling line.
Suspension & Ceiling Bracket Formula (`N + 1`): SLV specifies 2 mounting points on the first module (`300–800mm` from ends) plus 1 mounting point per additional inline module (`Total Brackets = Number of Inline Modules + 1`).
5-Pole Through-Wiring (`5 × 2.5mm²`)
Used for Standard ON/OFF runs. Carries `L1`, `L2`, `L3`, `N`, and `PE` (`2.5mm²` conductors) continuously through every module. Each batten has a physical `L1 / L2 / L3` slide switch inside so you can balance high-bay loads across 3 phases or switch alternate battens independently.
7-Pole Through-Wiring (`7 × 2.5mm²`)
Used for DALI2 Dimming and DALI2 + Emergency runs. Carries the 5 mains conductors (`L1, L2, L3, N, PE`) plus `2 × 2.5mm²` DALI bus lines (`DA+, DA-`). Note: All EASYLIGHT battens come pre-equipped with the full multi-pin plug; selecting 7-Pole automatically pairs the 7-Pole Feed-In Box (`FIB 300 7 25`) and 7-Pole Blind Covers (`BC ... 7 25`).
Two Ways to Add 3-Hour Emergency (`EM 3H`)
Option A — Integrated EM 3H Battens (White): `1500mm` and `2500mm` White battens (`1011231–1011242`) with a built-in `2.5W` (`450 lm`) 3-hour emergency battery pack.
Option B — Dedicated 1000mm EM Downlight (White & Black): Inline `1.0m` module (`1011506–1011509`) with a `3W` (`450 lm`) self-testing emergency downlight supplied with both Round (`140°` open area) and Oval (`136°×54°` escape corridor) lenses.
5 Optical Beam Distributions
- `WB` (Wide Beam ~90°): Uniform wide illumination for open-plan retail, supermarkets, offices, and lower ceilings (`2.5m – 4.5m`).
- `MB` (Medium Beam ~60°): Controlled punch for medium-height commercial, light industrial, and workshops (`4.0m – 7.0m`).
- `NB` (Narrow Beam ~30°): Concentrated high-intensity beam for high-bay warehouses and tall racking aisles (`6.0m – 12.0m+`).
- `OVAL` (Oval Asymmetric): Elongated linear distribution engineered specifically for long logistics aisles and corridors.
- `DA30` (Double Asymmetric 30°): Directs light at `±30°` onto vertical retail gondola shelving and warehouse rack faces.
On-Board 8-Step DIP Switch (Multi-Lumen `ML`)
Every batten has a 3-pin DIP switch on the driver (`200mA` to `550mA`) plus a `3500K / 4000K / 5000K` CCT switch:
| DIP Step | Pins (1-2-3) | 1500mm Batten | 2500mm Batten | Max / 16A |
|---|---|---|---|---|
| Step 1 (Min) | OFF-OFF-OFF | 27W · 5,271 lm | 29W · 5,825 lm | 95 / 88 pcs |
| Step 3 | OFF-ON-OFF | 40W · 7,790 lm | 44W · 8,838 lm | 64 / 58 pcs |
| Step 5 (Typ) | OFF-OFF-ON | 53W · 10,261 lm | 58W · 11,603 lm | 48 / 44 pcs |
| Step 8 (Max) | ON-ON-ON | 75W · 14,222 lm | 80W · 15,820 lm | 34 / 32 pcs |
01
White or Black · ON/OFF (5-Pole) or DALI2 (7-Pole) · Surface or Suspended
Select System Finish, Control Protocol (5/7-Pole) & Mounting Method
02
Auto-Fill by Target Metres or Customize Every Module Slot-by-Slot
Configure Your Trunking Line (Auto Run-Length Calculator & Visual Module Builder)
03
Auto-Matched 5/7-Pole Feed-In (`FIB 300`), End Cap / Feed-Out & `N+1` Brackets
Power Feed-In Box, End Termination & Suspension Hardware
04
17° / 24° / 60° Reflectors for EASYLIGHT SPOT 500 & Extra Spare Accessories